Pasen Posted April 18, 2016 Report Share Posted April 18, 2016 If I'm running low impedance injectors (2,2 Ohm) can I put one ballast resistor on the cable that is feeding +14V to the injectors or do I have to use 4 ballast resistors?I noticed that it was wired that way on my old Link G1 but will it work on the G4 Storm? Quote Link to comment Share on other sites More sharing options...
Simon Posted April 19, 2016 Report Share Posted April 19, 2016 When running sequential you need a ballast per injector.If group fired you can run one ballast per group. Quote Link to comment Share on other sites More sharing options...
Pasen Posted April 19, 2016 Author Report Share Posted April 19, 2016 Thanks.Will order 4 ballast so that I can run sequential then. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.