milton r33 Posted November 20, 2016 Report Share Posted November 20, 2016 Hi is the rb26 cas meant to be set to relutor or optical hall ? I have the AEM 24 TOOTH cas diski have the engine to top dead centre I have set the trigger setup to multitooth Trigger priority to trigger 1 in trigger 1 its optical hall ,multitooth position set to cam and tooth count 24 toothtrigger 2 optical hall sync mode to cam pulse X1 is this all correct ? Quote Link to comment Share on other sites More sharing options...
Steve Posted November 20, 2016 Report Share Posted November 20, 2016 That is correct.It supposed to be opticl/hall. The CAS is an optical unit.Remember to calibrate your timing before startup now mate.Disable the injectors, hook up a plugwire between the coil and plug on cyl one and hook up the timinglight to that. Nowhere else! milton r33 1 Quote Link to comment Share on other sites More sharing options...
krabstarr Posted July 25 Report Share Posted July 25 On 11/20/2016 at 3:01 AM, Steve said: That is correct. It supposed to be opticl/hall. The CAS is an optical unit. Remember to calibrate your timing before startup now mate. Disable the injectors, hook up a plugwire between the coil and plug on cyl one and hook up the timinglight to that. Nowhere else! What do you mean by calibrate the timing? Yoy mean to match up the table with the timing light? Quote Link to comment Share on other sites More sharing options...
Vaughan Posted July 25 Report Share Posted July 25 4 hours ago, krabstarr said: What do you mean by calibrate the timing? Yoy mean to match up the table with the timing light? Yes "calibrate the timing" would usually refer to using a timing light find the correct trigger offset krabstarr 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.