WhiteAfrikanz Posted April 28, 2017 Report Share Posted April 28, 2017 Ive used up my normal analog inputs on my XS loom and I wanted to see if I can use the digital inputs for my oil pressure with a standard oil pressure sender? I'm not hugely familiar with the DI's and want to make sure this is possible.Thanks in advance Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 28, 2017 Report Share Posted April 28, 2017 No. A digital input can accept a on/off type signal such as a switch or a frequency type signal like a wheel speed sensor. It cant read analog voltage type signals. What ecu do you have? There are possibly other analog pin available on the main header. Quote Link to comment Share on other sites More sharing options...
WhiteAfrikanz Posted April 29, 2017 Author Report Share Posted April 29, 2017 Link G4 RB25 NEO GTTLink.The DI is supposed to be used for Ethanol content though correct? Quote Link to comment Share on other sites More sharing options...
CamB Posted April 29, 2017 Report Share Posted April 29, 2017 The ethanol sensors send a PWM (digital) signal with frequency indicating ethanol content and pulse width indicating temperature. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 30, 2017 Report Share Posted April 30, 2017 On the GTT plugin you potentially have a couple of AN Volt inputs available on the main header.AN Volt 1 on pin 54 was originally for the MAF, if you no longer have a MAF then you can use this input.AN Volt 2 on pin 50 was originally for the narrowband oxygen sensor, you may be able to do away with this and use it for something else. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.