Guest |366| Posted March 2, 2010 Report Share Posted March 2, 2010 Тhanks..... Quote Link to comment Share on other sites More sharing options...
rayhall Posted March 3, 2010 Report Share Posted March 3, 2010 Normally the cells in the fuel table on light load are adjusted so the air fuel ratio is leaner. This may not be possible with the injectors you are using. There are big injectors that will work at small injector times, these are not made by RC. As the engine has 5 cylinders I cannot see a way to have five more injectors and get correct fueling in each cylinder. Ray. Quote Link to comment Share on other sites More sharing options...
Guest |366| Posted March 3, 2010 Report Share Posted March 3, 2010 ... Quote Link to comment Share on other sites More sharing options...
bsh Posted March 3, 2010 Report Share Posted March 3, 2010 I believe I use the same 120lb Lucas disc injectors in my Audi 5 cyl, and have no problems cruising at 15:1. I had the same problems as you when first installed, but lowering the injector deadtimes fixed the problem. Remember you must tweak the fuel map after adjusting deadtimes. BTW very nice power :shock: Quote Link to comment Share on other sites More sharing options...
Guest |366| Posted March 3, 2010 Report Share Posted March 3, 2010 .. Quote Link to comment Share on other sites More sharing options...
rayhall Posted March 4, 2010 Report Share Posted March 4, 2010 what injectors to use? These will work down to very low mSec. http://www.injectordynamics.com Ray. Quote Link to comment Share on other sites More sharing options...
Guest |366| Posted March 10, 2010 Report Share Posted March 10, 2010 ... Quote Link to comment Share on other sites More sharing options...
Guest |405| Posted March 11, 2010 Report Share Posted March 11, 2010 I second Ray's suggestion. injector dynamics is the Cat's pants !!! No need for another 5 injectors... use 1000CC from Injector Dynamics are more like 1200 @ 83 %... KPA Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.