chrisrevv Posted September 28, 2017 Report Share Posted September 28, 2017 Hi All,I have an issue where the engine fan step seems to be always active regardless on weather engine fan 1 or 2 are on.I noticed when the engine fans came on the idle dipped quite low and nearly stalled so I adjusted the engine fan step while they were off and noticed the engine speed changing.. this should obviously not be the case.. is there anything I'm missing?I am using the latest software and firmware, the ecu is a plugin WRXLink 3-4 Quote Link to comment Share on other sites More sharing options...
Simon Posted September 28, 2017 Report Share Posted September 28, 2017 I have seen this and I think the issue was the conditions for engine fan 3 were being met. This caused the idle trim to activate even though there was no Aux out assigned as engine fan 3. Quote Link to comment Share on other sites More sharing options...
chrisrevv Posted September 28, 2017 Author Report Share Posted September 28, 2017 Cheers Simon, I just had a look and the second fan was configured as engine fan 3 and setup to activate at 96deg however engine fan 2 isnt configured and is setup at 0deg.. hopefully thats the issue, Ill test it out tonight. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.