bmt Posted December 23, 2017 Report Share Posted December 23, 2017 Hi there, question on my new Vipec - I have 2 setups for turbo polaris - and the new vipec I have set up shows the Bap sensor reading - which comparing to my other unit is incorrect- the MAP sensor is reading a bit high as well - the other setup I have is showing 93 . Can you advise me of how to get the BAP sensor recalibrated - I'm assuming this is the internal VIPEC bap sensor. Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 23, 2017 Report Share Posted December 23, 2017 On the configuration page, check the Baro sensor is still set to "marine". If it is and it still reads incorrect then the sensor inside may have failed and you will need to contact tech support. Quote Link to comment Share on other sites More sharing options...
bmt Posted December 23, 2017 Author Report Share Posted December 23, 2017 Thanks, Adam - its confirmed to be in Marine mode - I took my Vipec #1 and swapped between sleds - I get the same indications from swapping to a different sled - Ill contact tech support next week. Any body in specific to chat with? Thanks for the timely reply! Happy Holidays, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.