Geo Posted February 28, 2018 Report Share Posted February 28, 2018 Hello. I just purchased link VR4 ecu, link ethanol content sensor and XS loom. Can I wire the ECS to the XS loom? Do I connect all three wires to xs loom or just the input and connect ground and power to ecu? Sorry I am a noob. Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 28, 2018 Report Share Posted February 28, 2018 Connect the gnd on the ECS to gnd on the expansion loom. Connect the Vout on the ECS to DI6 on the expansion loom. Connect the Vcc on the ECS to a switched +12V source - doesnt necessarily need to be ECU. Some dealers have told me they actually power the ECS using the 5V wire on the XS loom but we havent yet tested that enough ourselves to recommend it as an acceptable/reliable option. Quote Link to comment Share on other sites More sharing options...
Geo Posted February 28, 2018 Author Report Share Posted February 28, 2018 Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.