exileperformance Posted July 5, 2018 Report Share Posted July 5, 2018 Is there any outputs in the link thunder that could control a trans brake like a bump box for staging a turbo car? Quote Link to comment Share on other sites More sharing options...
Scott C Posted July 5, 2018 Report Share Posted July 5, 2018 There is, Adam made up this example: In this example, the Transbrake solenoid (connected via a SS Relay) is connected to Aux 1. The transbrake button is connected to DI1 - you can also use this same DI as activation for your two step limiter etc. The Bump button is connected to DI2. These buttons would be one side connected to ground, other side to the DI. When just the Transbrake button is "on", Aux 1 will be working in the lefthand cell of the aux table and output a 100% duty cycle to the solenoid (i.e fully locked). If you hit the bump button, the aux will jump to the righthand cell in the aux table and give a smaller duty cycle for the length of time set in the "virtual aux 1". The only settings you should need to experiment with are the Vitrual aux "Timer 1 <" setting and the right hand cell in the aux table. I hope I have explained what these two settings do ok with the note on the picture. Quote Link to comment Share on other sites More sharing options...
exileperformance Posted July 5, 2018 Author Report Share Posted July 5, 2018 Thanks!!! Quote Link to comment Share on other sites More sharing options...
Glenn355 Posted January 13, 2019 Report Share Posted January 13, 2019 What solid state relay do you recommend for this application? Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 14, 2019 Report Share Posted January 14, 2019 The Hella ones are quite nice as they fit in a standard ISO relay base. https://www.hella.co.nz/en/products/relays-flashers/solid-state-relays/12v-4-pin-solid-state-relay-22a.html Quote Link to comment Share on other sites More sharing options...
PRO32 Posted November 4, 2019 Report Share Posted November 4, 2019 Will this work the same with Link Fury? Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 4, 2019 Report Share Posted November 4, 2019 yep. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.