Tinytankwrx Posted July 7, 2018 Report Share Posted July 7, 2018 Hey everyone I'm running a MXL strada with a link G4, i'm having issues getting it to read my link fuel pressure and oil pressure sensors, It reads the MGP, ECT and AIT fine. I'm wanting Lambda,FP,OP to be display on the gauge aswell. Any help would be great! Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 7, 2018 Report Share Posted July 7, 2018 These should all work out of the box. What problem are you having? Is this the old MXL, not a MXS or MXL2? Quote Link to comment Share on other sites More sharing options...
Tinytankwrx Posted July 7, 2018 Author Report Share Posted July 7, 2018 This is the older AIM MXL strada unit RPM, Lambda, Coolant, MGP are displaying, but The FUEL and OIL pressures are not, That are tied into AN volt 7 & 8. Also speed is not displaying. Quote Link to comment Share on other sites More sharing options...
Tinytankwrx Posted July 8, 2018 Author Report Share Posted July 8, 2018 Heres some settings and such. adam link.llg adam link.pclr beckys config.cfz Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 8, 2018 Report Share Posted July 8, 2018 I havent played with an old MXL for a long time so might be missing something obvious but I dont see a whole lot wrong. For the oil & fuel press, I think the "high value" setting might have an influence, try setting this much higher - like 5000. Set the measure unit to KPa also while you troubleshoot. Speed looks to be set up how I would expect it but you could also try the other 3 ECU speed channels to see if any of them have data. You may also have to disable the internal "SPD_1" channel. servicesoon 1 Quote Link to comment Share on other sites More sharing options...
Tinytankwrx Posted July 8, 2018 Author Report Share Posted July 8, 2018 The dash doesn’t even display 0.0 But when I look at way the gauge is seeing I get exactly what link is seeing?! Quote Link to comment Share on other sites More sharing options...
Gerardo Posted May 22, 2019 Report Share Posted May 22, 2019 Hello good day. I have the same problem as Tinytankwrx. But I use a MXL TRACK. How did they fix it ??? Thank you Quote Link to comment Share on other sites More sharing options...
Btune Posted July 15, 2019 Report Share Posted July 15, 2019 Same problem here. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.