motomattx Posted July 10, 2018 Report Share Posted July 10, 2018 Can the plug in ecu use the factory maf sensor at all or is it just used for temperature? I see that there is an input for that pin on the ecu that is marked "maf" but if I look in the maf setup table it only lists a Subaru maf sensor for a selection. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 10, 2018 Report Share Posted July 10, 2018 It can be used but it is not normally recommended. If there is no built in calibration for your car (there should be 2 subaru and 1 evo option) then you have to find that data yourself or work it out empirically. Usually easier to use MAP. Quote Link to comment Share on other sites More sharing options...
motomattx Posted July 10, 2018 Author Report Share Posted July 10, 2018 Ok just was wondering if was actually a function that was needed was all. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.