encored Posted December 26, 2018 Report Share Posted December 26, 2018 Hi, I'm running an EVOLINK+ on an evo9 with an AEM CD7 output. I have successfully got to read Fuel Level on my ECU via Analog Input 5 in Volts. How can I send this signal to my AEM CD7 as there are no "primary input" labelled as AN Input #. Any help is appreciated. Thank you very much! DAN LINK.aemcd7 Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 27, 2018 Report Share Posted December 27, 2018 Here's a video showing how to do it: https://1drv.ms/u/s!AiYbYlZQuRHPoEQkoIc_i2gdxsS7 Quote Link to comment Share on other sites More sharing options...
encored Posted December 27, 2018 Author Report Share Posted December 27, 2018 Thank you very very much!!! Quote Link to comment Share on other sites More sharing options...
encored Posted December 28, 2018 Author Report Share Posted December 28, 2018 Hi Adam, Sorry for the disturbance again. I have set up both EVOLink and AEM CD7 according to your specifications but to no available. It could be my input that is causing the problem. my reading is currently in Ohms, how do i convert it to show Volts? Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 28, 2018 Report Share Posted December 28, 2018 You said in your first post "I have successfully got to read Fuel Level on my ECU via Analog Input 5 in Volts.", so do you have a fuel level reading in PC link or not? Do you have a pull-up resistor and filtering circuit wired? Can you attach you ecu and dash configs? Quote Link to comment Share on other sites More sharing options...
encored Posted December 28, 2018 Author Report Share Posted December 28, 2018 Realised its in Ohms. My bad! Will a 1k 0.5w resistor do the trick? will upload my ecu and dash tonight. Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 28, 2018 Report Share Posted December 28, 2018 You will need to do something more like this: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.