namre Posted January 4, 2019 Report Share Posted January 4, 2019 Hello, Below is the max map kpa value from statistics section. Do you know exactly what does this mean? Is it the existing tuned value? If so, from where I can find this since I could not find it anywhere? I would like to change it if it is the existing configuration but map limit table does not have this kind of value. The issue we are facing is a kind of boost cut above 1.4 bars and need to be sure that it is not related to tuning. 1.4 bars appr. fits to the figure below. But in map limit table we have 300 kpa which would mean that there should be no boost cut till around 2 bars. Thanks in advance for your help. Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 4, 2019 Report Share Posted January 4, 2019 That is the maximum map that the ecu has recorded since the statistics were last cleared. So your problem is unlikely boost cut. Given the maximum rpm shows 13000, I suspect you have a trigger error. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.