Jeffersonc Posted February 17, 2019 Report Share Posted February 17, 2019 R32 GTR RB26, I am using only the AAC Valve located on the vacuum chamber under the intake manifold. It has a quick adjustment screw and 2 terminal steper motor. Is the base map file with the stepper motor type as unipolar (6 terminal) the correct selection? It's difficult to access and remove the motor to watch the valve movement so I thought I would ask first. Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted February 17, 2019 Report Share Posted February 17, 2019 Yes thats correct, it is effectively ignored if the correct outputs are not configured. Quote Link to comment Share on other sites More sharing options...
Jeffersonc Posted February 17, 2019 Author Report Share Posted February 17, 2019 Cool thank you. Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted February 18, 2019 Report Share Posted February 18, 2019 200hz works just fine, the frequency is the times per second that the duty can be applied, the duty is the percentage of that period that is on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.