[KMS CAN Display on V Series]

On 9/9/2015 at 9:35 AM, Dave Kriedeman said:

Hi mate,

as Simon has stated it is not a modification issue with the V series it is due to the newer processor used in the i SERIES and G4+ that allows for this to work.

I have done a lot of MoTeC SDL, ADL and CDL dashes with V SERIES with CAN BUS.

Now these DASHES are cheaper and showing up second hand for sale , due to the release of the new C SERIES MoTeC dashes.

There is also the DASH 2 PRO option sold by LINK

These are very well priced and a nice unit.

Regards

Dave.

 

Dave im looking at purchasing Dash2pro to use with my V44. Do you have the can setup details? I can find plenty of info for G4+ but not much regarding the older G4/V series 

[Introducing RealDash - A Dashboard App for Android & Windows]

Need to get an OTG and charging solution before making the mounting more permanent but it functions very well. 

[Introducing RealDash - A Dashboard App for Android & Windows]

2 hours ago, Adamw said:

Yes, I think any of the baud rates should work and you can also use the Continuous-25Hz datastream setting in the ECU for faster updates but in my testing I didnt see any noticeable lag even with the slowest settings.  I suspect it maybe more video related in your Android device but if it works with higher speed settings then no problem using those.  I just thought there is no point running everything at max if it wasnt needed.

It is a $98 tablet so wouldn’t surprise me   It seems fine with the 12Hz so might leave it for the sake of some sympathy on the old V44 hardware. 

I think a hearty thanks is in order for your support through something that is essentially 3rd party. Really does not go unnoticed. 

[Introducing RealDash - A Dashboard App for Android & Windows]

22 hours ago, BradB said:

Looks like a slight delay on the android tablet which may be a pain as I particularly want for shift light display but I haven’t played with the software/settings enough to see if config my way around it yet. Any reason why I couldn’t increase the baud rate output from ECU and change the connection speed in RD?

Just played with this, have updated V44 output baud rate to 115200 and changed connection to match and now have practically 0 lag between input and display.  Very very happy boy. Now to play with some display config screens. 

[Introducing RealDash - A Dashboard App for Android & Windows]

 

6 hours ago, MagicMike said:

That's strange, as I'm using the same in-car pc I use for tuning also haha On about the 3rd screen of connection settings, I have 2 choices to pick 'Link ECU (com3)' or the 'PC name'. Tried both, without any luck. Did you get a similar choice?

Plugged in my android and it just worked.

Would expect com 3 would be the right one to use as mine uses com 4. I’ll check my settings and share tonight 

[Introducing RealDash - A Dashboard App for Android & Windows]

 

10 hours ago, MagicMike said:

Any tricks for win10? Worked straight away on my note8 android tonight. No luck with windows still

Not really mate. I followed the instructions and Win10 worked flawlessly and very simply. It is the same laptop I use for tuning so all the drivers are already installed etc.

 

I’ve had more issues getting android to work however that’s somewhat due to the fact I’ve never used the OS begore. 

 

Has anyone worked out if skins / configs are transferable between OS? Would be much easier to build a custom display using keyboard and mouse then load up on android tab. 

[Introducing RealDash - A Dashboard App for Android & Windows]

Have mine (V44 vi-pec) working on both win10 laptop and android 7” tablet with OTG hub. Looks like a slight delay on the android tablet which may be a pain as I particularly want for shift light display but I haven’t played with the software/settings enough to see if config my way around it yet. Any reason why I couldn’t increase the baud rate output from ECU and change the connection speed in RD?