T4700
-
Posts
71 -
Joined
-
Last visited
-
Days Won
2
Reputation Activity
-
-
T4700 reacted to Scott in closed loop lambda failsafe
Hi warmup, this is certainly a good idea, and is currently on our request list.
-
T4700 reacted to warmup in closed loop lambda failsafe
I'm wondering if you can separate +/- to two parameters from Closed Loop FTrim Limit,
then we can limit the negative fuel trim in a very small range that won't cause damage.
A fail safe can't prevent a half bad o2 sensor from sending back wrong signals.
Some stock ECUs do their closed loop f-trim this way.
-
T4700 got a reaction from Scott in Software update error
But before deleting dont forget to backup your calibration files if they are stored in this folder...
-
T4700 got a reaction from Jack Yap in 2 wire Idle Control Solenoid (Bosch) - no settings in PCLink?
... cant tell you... sometimes I might be blind... sorry... I didnt use the Content Tree... only the Search Funktion
but in PCLink Menu, I can only select between 4 wire or 6 wire (or am I still blind?)
And here is something interesting:
When I select Aux 1 to ISC Solenoid, the PCLink Menü Item for "Stepper Motor Type" disappears.
When I set AUX 1 back to OFF, The PCLink Menü Item for "Stepper Motor Type" does not come back.
When I change the ISC Mode from closed loop to open loop or vice versa after that, the PCLink Menü Item for "Stepper Motor Type" comes back - and this is independant from the the Aux 1 setting. It also comes back, when Aux 1 stays at ISC Solenoid.
???
thanks a lot
-
T4700 got a reaction from mapper in Searching for G4+ logfile (question to mixture map) and logging
Ahhh, sorry I made a big mistake in rpm axis calibration. My fail - I dont tell you what happened, its to stupid
everything is clear now
EGT input was already clear
thank you mate
