nilsp Posted August 10, 2019 Report Share Posted August 10, 2019 Hi, I have an ewp setup which is controlled by pwm, aux 4. I havnet set this up and dont understand all how this control method works. Anyway it works fine, just trying to adjust my 3d table to control it properly vs ECT. What I wonder is if there is any way I can find the actual numbers which controls it in any of the logging done? Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 10, 2019 Report Share Posted August 10, 2019 No, at present you cant log the actual commanded DC output of a GP PWM table. The best you can do is log the two parameters that are on the axes of the PWM table and when viewing a log the pink cross hairs will show where it was working. Quote Link to comment Share on other sites More sharing options...
nilsp Posted August 10, 2019 Author Report Share Posted August 10, 2019 1 hour ago, Adamw said: No, at present you cant log the actual commanded DC output of a GP PWM table. The best you can do is log the two parameters that are on the axes of the PWM table and when viewing a log the pink cross hairs will show where it was working. Ok, yes thats what Im doing as well. but needed to ask Thanks for clarification! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.