LS 24x trigger with no cam sync?

[bsh]

Hi,

Is it possible to use this trigger without cam sync?

Thanks

[Stevieturbo]

As most aftermarket ecu's only look at the falling edge, which gives no position reference...I doubt it. Although if they could set the ecu to read the rising edge which does have a variety of tooth gaps, it could be possible.

 

Why not just add/use the cam trigger ?

[Simon]

That one needs the CAM sync.

[bsh]

On 2/10/2020 at 12:18 AM, Stevieturbo said:

As most aftermarket ecu's only look at the falling edge, which gives no position reference...I doubt it. Although if they could set the ecu to read the rising edge which does have a variety of tooth gaps, it could be possible.

 

Why not just add/use the cam trigger ?

I will run wasted spark and dont want to wire a cam sync if I dont have to since I will be using the Atom with 4 outputs..

On 2/10/2020 at 1:43 AM, Simon said:

That one needs the CAM sync.

Ok thanks:)

[Stevieturbo]

Or else just stick a 36-1 onto the crank pulley and use it instead ?

[bsh]

On 2/12/2020 at 12:06 AM, Stevieturbo said:

Or else just stick a 36-1 onto the crank pulley and use it instead ?

I will just wire in the sync:) Thanks