ken1436215443 Posted June 18, 2015 Report Share Posted June 18, 2015 I want to wire in my pressure sensor can I use shield ground to replace sensor Ground? Quote Link to comment Share on other sites More sharing options...
Simon Posted June 19, 2015 Report Share Posted June 19, 2015 The Sensor ground and Shield ground are on a common ground. If the shield ground pin is not in use then use you can pick this up as a ground point. Sheik 1 Quote Link to comment Share on other sites More sharing options...
ken1436215443 Posted June 19, 2015 Author Report Share Posted June 19, 2015 Got it thanks hopefully this will solve my ground issues Quote Link to comment Share on other sites More sharing options...
Sheik Posted September 1, 2018 Report Share Posted September 1, 2018 Apologies for resurrecting a dead thread here but this just saved me asking a question parallel to it anyway. I just bought a pre-made A Loom which had all the "sensor ground" pins terminated to a "shield ground" pin. The wiring diagrams in the help file said as much, but its nice to have a confirmation that they are both technically the same thing once they are inside the ECU. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.