bocia79
-
Posts
20 -
Joined
-
Last visited
Reputation Activity
-
-
bocia79 reacted to Adamw in start attempt force gdi
You need to go to the set base timing screen and adjust the trigger offset until the timing light shows the same timing as the ecu setting "lock timing to". Make sure you hit the enter key when changing the offset.
Yes, assuming the crankshaft is "even fire" and the firing order is set correctly in the software the TDC events will be automatically set.
-
bocia79 reacted to Adamw in start attempt force gdi
Trigger 1 edge will need to be set to falling for that waveform you show above. You will notice there is a rising edge in the middle of the "missing teeth area" so rising edge will not work. Do us a new log after changing that.
-
-
bocia79 reacted to ClintBHP in Gdi spill valve energized +5v
Do not worry for some reason they have chosen to show the drive circuit, your valve is a derivative of the Bosch HDP Series and the MSV valve is a current not voltage based device, you will need to wire it in accordance with the GDI manual and this is one we can control quite well.
