Septy
-
Posts
41 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Septy
-
-
HI
I have a BorgWarner EFR Turbo Speed sensor can I connect it directly to ECU or I need a turbo speed transducer modules ?
For EGT sensors what (CAN module) would you recommand ?
-
Ok thanks you
-
In DI4 I have the clutch ,can I move in DI10 pin C7?
-
On 8/3/2020 at 12:12 AM, Adamw said:
The other 2 AVCS cam sensors at the back of the head need to connect to DI's. Suggest DI2 and DI3.
In this case I can't connect one of the AVCS sensor in DI3 as you suggested , in what other DI's could I connect the sensor?
-
DI3 is pin D16 and i have the Main Relay Ground when on , can I move the Main Relay on other DI's such as DI10 Pin C7?
-
ok thanks you very much
-
In B10 & B22 I have the Crankshaft Sensor
-
Hi guys! I have two questions: 1. I am a bit confused about how can I wire correctly the Camshaft position sensor and the AVCS angle sonsor LH and RH. Trig 2 is the same with camshaft position sensor B11,B23?
2. I am starting my second question by telling you that I am not using TGV , Purge Solenoid , A/C ,Subaru Factory O2 sensor, and Fuel Temp because I don't have it from the factory . I want to use Staged injection but on the injector 8 (Aux) I have the CE Light, in wich pin I can move the CE Light,
Thanks
-
-
-
I know 04 forester is not a 04 WRX
the ignition switch signal is in D14 I set the jumpers to 05-06 ,i have power on ECU now ,and blue led is on
Thanks
Can anyone help me with the unlock code for my ECU? I emailed the LINK dealer in the UK but I have no answer so far, I have not recived the code.
Thanks!
-
-
Hello guys!
I managed to verify almost all the pinouts of the diagram you sent me,with the original Subaru pinouts. The vast majority are identical but I have a problem: I don't have power in my ECU. The led on the board is not on. I verified the main relay, it's fully functional, I verified all the wires, all is good there. The main problem is that ECU is not sending power to the main relay. I also verified the electrical diagram from the original Subaru manual. PIN D16 is not sending power into the relay. I changed back to the Subaru original ECU and the ECU is working. When I put the key in on position in ignition switch, the D16 wire activates the relay and I have power in ECU. I don't understand why the LINK ECU does not send power trough D16. Can anyone help me, please? What am I doing wrong?
Thanks!
-
-
Hello last week I bought a Link G4X WRX104X PlugIn fits the Subaru WRX & STI V10 04-06 , where can I find a full pin specific diagram for this ecu ?
Thanks
Link G4X WRX104X PlugIn Subaru WRX & STI V10 04-06
in G4x
Posted
I have this sensor
The sensor is a +5V , Ground , SIGNAL =DGITAL INPUT ?