Odj
-
Posts
6 -
Joined
-
Last visited
Reputation Activity
-
Odj reacted to Adamw in Mitsubishi evo 8 plug in install
I suggest you use the pinout in the G4X version of PC Link as they are now a bit more complete.
Pin 40 is controlled by the jumper on the bottom board. If it is in the Evo4-7 position it is basically open circuit (Evo 4-7 used this pin for the catalytic converter warning lamp). With the jumper shorted (EVO 8 position) then pin 40 is sensor ground. Click on the image below will give you a bigger version.