Robsevo9

Hey Adam thank you, I did and I get no response from the spray, I also hear a poof sound when I put the key on the ” on” position it doesn’t always happen but it smells like smoke when it happens.

Will do!

Thanks man, problem is car doesn't turn on at all.

hello, here it is. thanks PC Datalog - 2023-10-22 11;48;52 wont start.llgx 3-19-23 rev 1.pclx

Hello wondering if anyone can give me advice , just did the build on my evo 9, I’m running link g4x pnp, car has fuel, car has spark, car is timed, injectors are new and working fine, (fuel on piston) there’s nothing coming up on the ecu saying something isn’t connected, everything is fine…. But it won’t start like if there’s no spark like if the key isn’t registering idk what else to do. Crank/cam sensors are also good . I’m lost , any advise will be very much appreciated thank you in advanced

Hello, where can I buy this cable? I need one for my WB. Thank you

There you go being awesome again! Thank you, I have no idea how to do so. I am trying to get this car running so I can finally get it tuned. Last person who had it really messed up a lot of things on it that I been fixing as I go.

Hello everyone I am trying to download a base map for my evo 9 and there are 2 options. One is 7bar and the other doesn’t have that in it, I’m guessing it’s a 4bar. I don’t know much about this ecu so I am reaching out to the pros to find out which one I need. It doesn’t say anything on the board btw..

Thank you so much! I found out that I do have power at the ignition wire (black and white)#2 but somewhere in the middle it gets lost and my relay isn’t getting that power on #3 for my first relay… and same for the 2nd relay but it has very lil light and my tester is very dim….. here’s the crazy part. The both click when I turn the key to On pos, so somewhere from the ignition to relay 1 pin 3 there’s a short….Previous owner hacked a lot of wires in the car. I was thinking of using pin 21/ing3 as a trigger to my double pumps. Which is the oem output for fuel pump

Thanks for the reply, on the ecu harness I am getting power for that wire that goes into the g4x, a direct wire from the ignition might work but I would need to relay and fuse it. I am trying to keep it oem and not hardwire anything. I’m going to look at aux9 to see if it’s taken up thanks

Hello, I am having a fuel issue with my evo where the white oem power wire isn’t getting any power to start the fuel pump. I am just going to use the g4x to trigger the relay. Aux 10 and 11 are already being used idk on what previous owner hacked all these wires and I do not want to touch anything. Does anyone know how and where can I connect a wire to trigger the relay for the fuel pump?