Austin23

No I didnt. How would I go about doing that. I see the setting. I’m just unsure of what to do to calibrate it.

I recently replaced my Throttle body and Throttle body motor relay now I'm having issues with my idle it seems to be slow to settle back down under 1000 RPMs and bounced around 750 to 850 RPM E Throttle Log.llg

Thank you soo much ended up benign the throttle motor relay (stupid me didn’t realize the circuit had a relay and fuse) Now 1 more question how would I go about calibrating my E Throttle and Pedal position sensor? Thank you for all your help

MAP.pclr

E-Throttle Log.llg

third log file.llg

sorry again i am new to this standalone ecu thing so i hope i logged this properly. thanks for all your help first log attempt.llg Second log file.llg

Ok great when I get home tonight I’ll set up the computer and send in a log. As I am currently dealing with this issue, I could only get the car to start fine once

I recently got my 2003 nissan 350z with a link g4+ plug in tuned, the car only has a exhaust and intake. I've been driving the car for almost 1 month with no issues. But the other day when trying to leave work, when I started my car RPMs were stuck at 2000 and I had no Throttle I could put it to the floor and nothing. I got it to start normally after a couple more tries and got it home no issue I even stopped and shut it off before making it home. But when I got home I had the same issue RPMs at 2k and no pedal. I got my computer and scanned it and had codes 75 (E Throttle 1 TP target error), 73 (aux 9/10 supply error), 71 (Aux supply error e Throttle) 101 (An volt 12 above error High value) 70 ( e Throttle min %DC limit) and the engine speed has been limited to 1800 due to an e throttle fault. I'm just confused because I had no blown fuses, and I could see my throttle position sensor was working as it was moving through the RPM range on my tune, I also replaced the Throttle body with a brand new one so I'm just very confused why I'm still having issues with my Pedal and e Throttle. Please help, any help is appreciated sorry I'm still very new to the standalone ecu world lol Thanks any help is greatly appreciated