danimin31
Members-
Posts
21 -
Joined
-
Last visited
danimin31's Achievements
-
-
danimin31 started following G4 with LinkCan Lambda
-
But my skyline plugin G4 from 2014 has a CAN port. In my case will be possible to connect the CAN-Lambda module?
-
Yes. I have tried with direct spark mode and wasted spark. I follow the manual deleting the ignitor 4 drive too and same. Explosions on the exhaust and intake when stop cranking
-
I have try this, and doesnt start. The timing its ok, im thinking about a bad ignition config, because sometimes when i’m cranking, it sounds like a explosion on the exhaust and sometimes on the intake.
-
danimin31 reacted to a post in a topic: Rb20det no spark and disconnect
-
It has 10 litres now, it’s not empty because the reseirvor light its off
-
Hi. I have tried but nothing changes. On the video you can see only when i press accelerator to the floor it want to start.
-
Yes. Now i have spark, yesterday sound like a start try when logging. I continued trying to start but it doesnt start.
-
Hi Adamw here they are:rb20det.pclrb20 fail with map.llg
-
Today i had tested another G4 with same map and doesnt start.
-
The engine still does not start. Still having not spark.
-
Now i have an external 3bar MAP calibrated and turn off eccs. I don’t why only appears 4 ignition signals. Nothing changes when cranking
-
Up!
-
I restore it to factory settings and did an update and nothing changes
-
Sorry. That is the wrong map. This is the correct one: Also my Ecu Status is not as yours:
-
This is the last i have testNissan RB20DET.pcl