MendiK

Update: I went to do base timing today and found that the ignition coils were not firing due to a voltage drop. I previously had to ground pin 16 for the ECU to stay connected while cranking which probably should have been my first sign to check wiring and pins. After fixing the voltage drop issues by installing a switch panel the engine started right up with a known stock ECU. Proceeded with the link and everything is working well! Cheers Adam for the support here and in all of the threads that gave me troubleshooting ideas!

Ive attached a trigger scope from earlier today. I was unable to confirm base timing since I was alone, will get back to that either thursday or saturday. Both triggers look pretty jittery. Any thoughts? Trigger Scope - 2023-12-26 4;10;09 pm.llgx

Hello, I'm a completely new to tuning and I'm having some trouble getting the engine started. I have a slight feeling that it's not an ECU or software issue but would like to get some opinions and assistance. Here is a log and the map, sorry for no trigger scope I will be able to get one next week, cheers. TIA PC Datalog - 2023-12-23 4_32_52 pm.llgx nostart.pclx