[new Aem x series wideband]

Hello guys @ link ecu its Orlando Bello finally back on the forum.

I have been trying the new aem wide band on a link g4+ecu  with the latest firmware and there in the lamda1 input there is a aem xseries calibration i have used that .but i notice a big difference in the afr reading vs my dyno .i have use the 0-5v singal from the aem x series module and the module also require a sensor ground .the difference is like this under wot my dyno show 11.5afr and in my pc link log show 12.7afr .is there any thing i should look at any suggestion.i have not try aem x series module on the CAN network jet because im missing the CAN port connector on the link g4+ storm ecu.

[Link G4 Atom]

Hi aim Orlando Bello and aim new on the forum and new with Link ecu's,going to start with to the Atom model the get going with the link ecu and softwear,

my question is that i have just notice that the Atom dont have any 2step ora a 2step antilag build in ???

my first installation will be on a Toyota starlet with 4efte engine.