jozef-turbojoe
Members-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by jozef-turbojoe
-
thank you
-
what are you're trigger setting ? what cam and crank trigger h2 have, i am going to install standalone cant find anywhere what tooth count is on this bike . Thank you in adwance
-
hi i was wondering if anyone have a base map for ls1 coil on plug crank 24x cam 1x thanks
-
i try to coneckt both grounds on coils  to block , than power ground to block and refrence ground to sensor ground and im stil having problem locking the timing , im NOT geting crank cam errors .car wil start after a configure my trigers as multy tooth 24x , 1 cam puls istead ls1 5-10 but still timing is jumping all ower !! i am goin to scope the cam crank and look for sync problem but im thinking it could be something with coils. also what should i set in ignition setting ? i set it up as constant duty falling. one other think. first i was providing 12v /batt voltage to cam crank hall sensors now i change it to 8v coming from ecu. does this matters???
-
im trying to start for a first time this ls1, witch is 03 US model LQ4 6.0 L ,COP 24x with cam sensor sinc. engine from truck .I am using ls1 triggers 5-10 and i have RPM steady i have crank and cam signal yes no errors. when i lock the ignition timing so i can set the offset . i get one or two flashes on the mark from timing light than as i continue cranking i continuosly have timing flashes but mark desapears! im wondering if anyone have a base start up map that i can try , or posibly give me idea what could cause this. thank you .
-
how to set up internal knock with stock S54 bmw sensors G4X
jozef-turbojoe replied to jozef-turbojoe's topic in Link G4
yes i all ready wire up front and rear , im just wondering what would be the correckt setting so link can pick up the sensor and how do i set up tables and corection im not sure if i set it up corectly any sugestions if possible cal file thanks. -
how to set up internal knock with stock S54 bmw sensors G4X
jozef-turbojoe posted a topic in Link G4
Hi .. Can anyone help me how to set up stock BMW S54 motor E46 m3 knock sensors to work with internal knock detection  G4X box . also how do i test it or introduce to ECU what is normal and what is considered knock. Thank you . -
Hi ...can anyone help mi understand what im doing wrong setting up wanos. Car is wired up and running we strapped the car to dyno and begin with base map , but cam error count is large and i am bit confused coz i newer did dual vanos . I am not sure if its my settings , but i am using DI-1 for intake cam, ref and DI-2 for ex. reference and 1-4 aux.ch. diodes wore removed from vanos module , base ignition timing lock on spot follows well no problem .How do i check when cams are at 0 deg. ?? in VVT tables dos 0 value means 0 deg . and than positive # is cam advance and neg. # is retard ?