[Attach image to new topic.]

The Max total size when attaching an image is getting smaller and smaller.
Why is this?

[I want to display A/F in MXS 1.2 Strada.]

Resolved.
Thank you for all your help.

 

[I want to display A/F in MXS 1.2 Strada.]

Thank you for everything.
There is something I don't understand again. Please let me know.
I can now display the AFR, but I don't know how to change the position of the decimal point.
The 146.0 A/F in the image is actually 14.6 A/F.
 

 

[Method of gear detection.]

I'm trying to do what I used to do with other cars, but I can't do it as well as I'd like.
No matter how many times I try, it's the same.
What am I doing wrong?

[Method of gear detection.]

Hello.
I am starting the calibration from 1st gear, but at the beginning it says it is calculating, and soon after it says it has finished.
Even though it is not running.
Speed is taken from the wheel speed sensor in LR.
It is a Nissan BNR32.
What am I doing wrong?

 

 

 

[I want to display A/F in MXS 1.2 Strada.]

Thank you for all you do to keep me informed!
 

[I want to display A/F in MXS 1.2 Strada.]

Hi all.

I want to display A/F in MXS 1.2 Strada.

I am using the GTRLink plugin.
A/F is an analog input.
Please give me some guidance.

Best regards.

 

 

 

[Indication of pressure Decimal point]

I misunderstood the units.
Thank you very much for your guidance.
 

[Indication of pressure Decimal point]

Hello, everyone.

I want to display the decimal point of the pressure.
Currently, the display shows 2 followed by 3, 3 followed by 4, etc.
For example, the decimal point of 2.3, 3.7, etc. will not be displayed.
I also changed the gauge settings.
I was not able to solve the problem.

Please instruct me.

 

[I want to input the Defi (Nippon Seiki) sensors to LINK.]

Hi all.
If anyone knows how to calibrate the Defi (Nippon Seiki) pressure sensor and temperature sensor, please let me know.

 

 

 

[How to activate the tachometer when the 4A-G coil on plug]

Thank you！

[How to activate the tachometer when the 4A-G coil on plug]

I changed the AE86 4A-G 16V to coil on plug.
After that the tachometer does not work.
How can I get it to work?

[Toyota AE86 (4A-G16V) intake air temperature sensor]

Thanks for the quick answer!
 

[Toyota AE86 (4A-G16V) intake air temperature sensor]

Hello everyone.
Is the intake air temperature sensor setting for Toyota AE86 (4A-G16V) the same as Std Bosch STD? What is the exact tuning of the inlet air temps?
 

 

 

 

 

 

 

[Unable to get lambda to display properly.]

Thank you!

[Unable to get lambda to display properly.]

教えて下さい。
ラムダを正しく表示することができません。
lambda1とCal4を間違って設定していますか？
出力値Aを680ラムダに、出力値Bを1360ラムダに変更しようとしましたが、できません。
 

 

[How to purge control.]

I understand.
Thank you very much.

[How to purge control.]

Please let me know.
I'm using the LINK Monsoon G4+.
I wanted to connect the VSV to the AUX4 to control the purge.
But the VSV didn't work.
I used a circuit tester to check the voltage and thought it was fine.
When I tried to connect the power detector lamp, it still did not turn on.
However, it is normal on a circuit tester.
I tried connecting a relay to it, but it didn't work.
I also tried the AUX5 and got the same results.
Am I doing something wrong?

Best regards

[base map for TOYOTA AE86 4AG16V]

I'll give it a try.  I am grateful.  Thank you very much.

[base map for TOYOTA AE86 4AG16V]

The upper side of the distributor wheel is 4 teeth. The lower side is 24 teeth.
The LINK I'm using is monsoon.
I did not connect the hose for the MAP sensor in the monsoon. To the manifold.
210cc injector size.

[base map for TOYOTA AE86 4AG16V]

こんにちは。

モンスーンはトヨタAE864A-GEU16Vに使用されています。
エンジンが始動します。しかし、それはかかりません。間違いがありましたらお知らせください。
点火システムは在庫販売業者です。
燃料噴射システムは在庫がありますが、高抵抗インジェクターを使用しています。
これは4スロットル仕様です。

よろしくお願いします

 

[base map for TOYOTA AE86 4AG16V]

Thank you very much.

[base map for TOYOTA AE86 4AG16V]

Hello everyone.
I need a base map for TOYOTA AE86 4AG16V.
Please help someone.

[PC-LINK does not communicate when AIM Dash MXS Strada and LINKECU are connected.]

I'll try.
I appreciate your guidance.
Thank you.

[PC-LINK does not communicate when AIM Dash MXS Strada and LINKECU are connected.]

LINK ECUに接続されているUSBケーブルは使用できませんか？
RS232ケーブルが必要ですか？