Superstock22s
-
Posts
8 -
Joined
-
Last visited
Reputation Activity
-
Superstock22s reacted to Adamw in Innovate MTX-L wideband to link G4+Atom
A couple of extra tips for the MTX-L...
Connect the innovate yellow wire to any spare Link analog input.
The MTX doesnt have a dedicated analog ground so this will often cause a large and variable ground offset if grounded to the wrong location. The Innovate manual suggests grounding to the negative battery post but I would suggest the engine block instead.
The "innovate LC1" calibration in the PCLink software is the correct one to choose (MTX is the same).
-
Superstock22s reacted to ClintBHP in Innovate MTX-L wideband to link G4+Atom
You can not only use it for data logging but auto tune function too.
Use the 0-5v output from the innovate and put that on a free AnVolt input on the Link. Set this input to Lambda, there is a Innovative LM1 Calibration in the drop down list but check the calibration has not changed by comparing the Innovative LM1 manual with your MTX-L manual.
If it has changed then choose one of the simple cal tables, as the innovate has a linear output and set the calibration according to the innovate manual.