twentyvalvevw Posted May 29, 2019 Report Share Posted May 29, 2019 Hey all, I am having a tough time understanding the alarms page on this CD-7, Warning messages work fine. I am having issue getting the Alarms and screen to come up, seems to be taking a while and I am also having issues with the messages flickering instead of blinking once per second or twice per second. I have attached the layout if anyone want to point me in the right direction. Default-Black-LinkG4+ carbon edit3.aemcd7 Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 29, 2019 Report Share Posted May 29, 2019 I had a quick look and dont see anything obviously wrong. I dont have a dash here to test myself. The only thought I had is a lot of your warnings are triggered by the same input as the alarms so the two may be possibly be overriding or interacting with each other. As a quick test I would try deleting all the warnings to see if the alarms then behave any more reliably. If not I think it is one that needs to be discussed with AEM. Quote Link to comment Share on other sites More sharing options...
twentyvalvevw Posted May 29, 2019 Author Report Share Posted May 29, 2019 Hey Adam, I have tried both ways, with the warning messages and with the alarm messages cant seem to figure it out. doesn't seen to matter. BTW there is a simulator in the new dash design 2. Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 29, 2019 Report Share Posted May 29, 2019 Yeah the simulator is very flaky the few times I have played with it. I think you are going to have to get help from AEM on the alarm issue. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.