EricLW Posted July 4, 2019 Report Posted July 4, 2019 Hi, i have suzuki G13b single cam need install link G4+, this engine only have cam position sensor. What trigger mode for this trigger pattern. Thanks. Quote
Simon Posted July 4, 2019 Report Posted July 4, 2019 That pattern is not supported and you would have to modify it to just 4 teeth at tdc points. You are limited to group fuel and distributor. Quote
EricLW Posted July 6, 2019 Author Report Posted July 6, 2019 Hi Simon, thanks for you reply. Maybe i want to install the trigger whell on crank pully. So what trigger mode to be recommend without cam signal (single trigger)? Imposible to direct spark? Thanks. Quote
jonnyt80 Posted July 6, 2019 Report Posted July 6, 2019 You will need a cam signal for direct spark/sequential injection A 36-1 trigger wheel will be fine on the crank pulley You could possibly make a cam trigger using a bolt or other form of pickup on the cam pulley. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.