Foxdie Posted July 26, 2019 Report Share Posted July 26, 2019 Hi folks, I'm working with a ViPEC V44 PnP board for an Evo 4-8, the bottom board is a v1.0 rev (I think from memory, it's not nearby at the moment) and has this expansion connector; (Grabbed offline from a saved VTS file) The problem is however, I cannot find DI 7 / DI 8 / Volt 7 / Temp 4 in the VTS software. I have tried loading a base map for the Evo 4-8 board included with the latest VTS software (V5.6.7.3632) and confirmed the V44 is running at the latest firmware rev offered by this version of VTS. Please can someone advise how I can make use of these pins? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 27, 2019 Report Share Posted July 27, 2019 In the Vipec days you could buy either a V88 or V44 version of the Evo plug-in, the V88 had more IO but was more expensive. They both used the same adapter board. A V44 plug-in doesnt have those inputs as you have found. What you see in the software is what you have, only AN Volt 6 will be available on the expansion port. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.