Jump to content

Electric - sensors problem


Recommended Posts

Your engine temp is going unstable for some reason and is reading as low as -40 in some places and is then causing the RPM limit to go to 1000rpm and the fueling will also be upset. 

I would check the connections to and from the water temp sensor and the sensor its self. 

Link to comment
Share on other sites



today i checked the wiring and it looks ok

tomorrow I try to change the sensors (coolant sensor and air temperature sensor)


I also found another problem I wanted to connect a solid state relay to aux ign5 but the aux does not work

may be a related problem?

thank you so much

Link to comment
Share on other sites

  • Elia changed the title to Electric - sensors problem


Thank you for your help


I only powered the trigger sensors and the engine runs well, no 5V issue

Tomorrow I check the remaining wiring and sensors


Can I send you the ECU to enable aux IGN 5?


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...