Robert Krauss Posted September 17, 2019 Report Posted September 17, 2019 I am trying to determine if the CAN Bus protocols use by Link will talk to my Dakota Digital instrument system. Dakota Digital does offer an integration module that accepts OBD-II J1850 PID protocols? I have attached an excerpt from the Dakota Digital website that explains their CAN Bus compatibility... Any help would be greatly appreciated. Quote
Adamw Posted September 17, 2019 Report Posted September 17, 2019 The Link uses ISO15765 CAN OBD2 which your doc above says is supported. Here are the PID's that the Link ecu supports: Quote
Robert Krauss Posted September 17, 2019 Author Report Posted September 17, 2019 7 hours ago, Adamw said: The Link uses ISO15765 CAN OBD2 which your doc above says is supported. Here are the PID's that the Link ecu supports: interestingly enough Dakota is stating it won't work and included the following.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.