Warchild Posted September 24, 2019 Report Share Posted September 24, 2019 Hi all Busy setting up a Subaru 22B P1 for a customer ( STI V6 model). Under the knock setup, again there is no values, can anyone send me the knock tables, using the built in knock sensor ? ECU Setting -> Knock Control -> Knock Target . My tables are all empty. Many thanks in regards. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 24, 2019 Report Share Posted September 24, 2019 The knock target table needs to be set up by your tuner using audio knock detection equipment after properly tuning your ignition table to suit the fuel and other variables. The knock signature of the engine is affected by a huge range of variables so you cant just copy settings from a similar engine. Some of the other settings such as frequency channel and cyl gains etc will probably be similar but the knock threshold (target) table will be completely unique for your car. Quote Link to comment Share on other sites More sharing options...
Warchild Posted September 24, 2019 Author Report Share Posted September 24, 2019 Noted thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.