Jump to content

Accel Hold when using Semi-Sequential


Recommended Posts

Posted

Just wondering if when using Semi-Sequential with Injectors paired in firing order (1&5, 3&6, 2&4) does the Accel Hold function count the outputs that don't exist on the ECU? Does the ECU count INJ output 4 even though it is not being utilised in Semi-Sequential mode, the only Injection Mode option is Sequential so I assume it would count #4 but not #5 and #6 because they don't exist in hardware?

 

 

Posted

Yes, it does count the injection event even when there is no driver.  

Here is a quick test with and old Storm ECU (4 inj outputs), white trace is with config set up as 4cylinders, pink trace is same accel settings but engine config set to 8 cylinders.

0nddcsV.png

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...