Gatekeeper Posted November 12, 2019 Report Posted November 12, 2019 Hi all, I am new to the Vipec scene and just got a PNP Version for my Subaru (V7-9). I have installed an ethanol sensor (VCC to 12V ignition, output hooked up to a digital input #4 (directly, no resistors) ) and ground to chasis ground. I've setup the ecu to use the internal pull up resistor and an active edge of "Rising" however for some reason I can only read the ethanol %. The temperature is highlighted in red and displays "132 deg c". Does anyone know why this is not working? Appreciate the help in advance... Thanks Quote
Simon Posted November 12, 2019 Report Posted November 12, 2019 suspect old firmware. Check firmware version and if old suggest an upgrade. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.