Racepak no longer displays Data after Update. IPN35 - 350Z TT

[JLT Auto]

Hoping someone can shed some light for me, 

Running a Vi-pec IPN35 Direct plug in ECu in a TT 350Z - 

Recently Updated Software in ECU and has been Re tuned since this the RACEPAK no longer displays DATA. 

Is there a Section in the ECU where this needs to be reconfig? or should it Automatically work as before? 

Note - ECU will not connect to the Laptop if RacePAK is plugged in aswelkl. There are two ports in ECU one in the Body if the ECU ( RACEPAK Plugged into & Laptop will not connect through this port ) 

Separator connection/wire coming out of ECU  ( Laptop will only connect through this port ) 

ECU is a Vipec IPN35 Plug for 350Z 2004

 

Cheers. 

 

[Adamw]

Is the dash connected to serial or CAN?  What is the part number of the racepak VNet module?

Can you attach a copy of your tune.

[JLT Auto]

Hi Adam, 

Thanks for your reply sorry it took so long to get back to you its been crazy busy. 

 

Please see attached Tune file also see attached picture of the ECU data. 

 

Hallam performance.pclr

[Adamw]

It would have been helpful to have the racepak Vnet part number so we could confirm how it is connected, but for now I will make an assumption it is serial and you can try this:

 

Go to the main configuration menu and set datastream mode to requested short and baud rate to 57600, then do a store (F4).  Disconnect laptop, plug in dash and then do a power cycle (ign off/on), report back if you have live data.

[JLT Auto]

Thanks very much Adam, 

 

Will give it a go and let you know. 

 

Cheers