Bud Posted February 8, 2020 Report Share Posted February 8, 2020 Hello I have some problem for setting correctly new injectors ASNU 1500 cc. I explain you, i have Mitsubishi Lancer evolution 9 with tune engine with ECU LINK G4+ plug in. Before my car was running with injectors ID1300X with fuel Pressure 3.5b, on modelled multi fuel. with fuel e85 i was limit on boost fuel map was alredy number 150 on fuel map. I order new injectors to my firend. He order ASNU Injectors 1500cc. https://www.asnu.com/injectordata i start to install and made setting of new Injectors. i start from Fuel pressure 3.0b for 1500cc setting Now my car not running well, idle is not stable and all time pumping. on fuel map at idle car was really lean and i need to put +20 value for correct lambda i not understand why can you help me on setting of this injectors best regards Ludovic Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted February 8, 2020 Report Share Posted February 8, 2020 Your dead time values are incorrect. What dead time values are you using? You should be looking at IDC% to see if injectors are maxed out NOT the 150 number in the main fuel table as there are so many variables. Quote Link to comment Share on other sites More sharing options...
Bud Posted February 10, 2020 Author Report Share Posted February 10, 2020 On 2/8/2020 at 10:06 PM, Ducie54 said: Your dead time values are incorrect. What dead time values are you using? You should be looking at IDC% to see if injectors are maxed out NOT the 150 number in the main fuel table as there are so many variables. hello i used the dead time ASNU 1500cc give me Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted February 10, 2020 Report Share Posted February 10, 2020 I had a set of there 1300cc injectors and found there data not suitable for the link. Do your injectors have the diffuser plate on the bottom? Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted February 11, 2020 Report Share Posted February 11, 2020 Quote Link to comment Share on other sites More sharing options...
Bud Posted February 12, 2020 Author Report Share Posted February 12, 2020 On 2/10/2020 at 9:32 PM, Ducie54 said: I had a set of there 1300cc injectors and found there data not suitable for the link. Do your injectors have the diffuser plate on the bottom? i think it is same of 1300cc. i think yes i have diffuer Quote Link to comment Share on other sites More sharing options...
Mike2J Posted February 16, 2020 Report Share Posted February 16, 2020 Always struggle to get ASNU injectors to work like they should, their provided data seems like its miles off for some reason. Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted February 17, 2020 Report Share Posted February 17, 2020 On 2/13/2020 at 8:19 AM, Bud said: i think it is same of 1300cc. i think yes i have diffuer Use the table i posted above, there the same injector just with a different amount of holes. Quote Link to comment Share on other sites More sharing options...
Bud Posted March 29, 2020 Author Report Share Posted March 29, 2020 On 2/17/2020 at 1:44 AM, Ducie54 said: Use the table i posted above, there the same injector just with a different amount of holes. Thanks i will try Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.