zaihas.chan Posted April 4, 2020 Report Share Posted April 4, 2020 Hi, I'm planning to upgrade from ALTEZZA TALT+ to ALTEZZA TALTX. Is it compatible for the pinout (analog and digital I/O) also for the expansion? Quote Link to comment Share on other sites More sharing options...
TechDave Posted April 6, 2020 Report Share Posted April 6, 2020 They're identical. Quote Link to comment Share on other sites More sharing options...
Slammer Posted April 11, 2020 Report Share Posted April 11, 2020 Does the TALTX have capacity to run 8 cylinders sequential injection and individual ignition in an ALTEZZA - or is it the same as the original TALT? Quote Link to comment Share on other sites More sharing options...
wastegate Posted April 13, 2020 Report Share Posted April 13, 2020 Same as original from what Dave has said. The pinouts are only wired that injectors 1-6 and ignition 1-7 are hard wired to the header from the main board. Quote Link to comment Share on other sites More sharing options...
zaihas.chan Posted April 13, 2020 Author Report Share Posted April 13, 2020 thanks for the help! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.