Guest |788| Posted August 4, 2011 Report Share Posted August 4, 2011 I try and load an ecu-pcl file or a logger-llg file I get an error. An invalid character found in text content line:0. I tried many different files that have opened before but no luck. I am running the 4.8.1.1033 software.Any help would be great! Thanks,Mark Quote Link to comment Share on other sites More sharing options...
Simon Posted August 5, 2011 Report Share Posted August 5, 2011 Can you upload or email a file through that you are unable to open. Quote Link to comment Share on other sites More sharing options...
ptkeens Posted August 2, 2012 Report Share Posted August 2, 2012 Our tuner ran into issues when he attempted to load up his VTS to tune a car and found this nasty error. I found that the error has to do with XML, so I looked in the VTS folder and saw that there were 3 XML configuration files. Through the process of elimination I found that our particular error was located in the popout menu configuration file. You can safely move/delete all 3 of these files, as they will be re-generated on next startup (Keep in mind that you may lose your configuration settings, however). After removing the file, VTS started up and opened our file cleanly with no errors! Hope this helps someone else. Inn-Tune 1 Quote Link to comment Share on other sites More sharing options...
Simon Posted August 2, 2012 Report Share Posted August 2, 2012 Thanks for posting this Im sure it will help out. Inn-Tune 1 Quote Link to comment Share on other sites More sharing options...
JCE Posted August 13, 2012 Report Share Posted August 13, 2012 Yes i had the same problem, good that someone found a solution. I got it working now 8-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.