StijnFSP Posted April 20, 2020 Report Share Posted April 20, 2020 hi , what is the best option to use the canbus on the ttlink for an addidtional aem x series lamda over canbus because the oem car uses canbus also ? or od i need to use the analogue output? and does someone have a base file with the settings setup ? best regards stijn . Quote Link to comment Share on other sites More sharing options...
Vaughan Posted April 20, 2020 Report Share Posted April 20, 2020 Your ECU most likely has a second CAN bus available which can be used for any additional CAN stuff you want to add. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 20, 2020 Report Share Posted April 20, 2020 To give a little more info. The OEM functionality uses "CAN2". The round 6 pin port (without red oring) that is next to the USB tuning port on the side of the case is CAN1, you can use this for connecting any accessories. There are set up instructions for the AEM Xseries in the help file. Vaughan 1 Quote Link to comment Share on other sites More sharing options...
StijnFSP Posted April 21, 2020 Author Report Share Posted April 21, 2020 15 hours ago, Adamw said: To give a little more info. The OEM functionality uses "CAN2". The round 6 pin port (without red oring) that is next to the USB tuning port on the side of the case is CAN1, you can use this for connecting any accessories. There are set up instructions for the AEM Xseries in the help file. Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.