ali toroganan Posted April 20, 2020 Report Share Posted April 20, 2020 (edited) im trying to wire up the knockblock to the g4 plug in for wrx v5-6 but i only have a digital input and i dont have any auxiliary channels, please help Edited April 20, 2020 by ali toroganan not enough to make it clear Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 20, 2020 Report Share Posted April 20, 2020 Probably the best option for the knock window is to temporarily use Aux 3 (was AC clutch) or Injector 5 (CE light), then you can set them back to their original functions after tuning. Quote Link to comment Share on other sites More sharing options...
ali toroganan Posted April 20, 2020 Author Report Share Posted April 20, 2020 12 minutes ago, Adamw said: Probably the best option for the knock window is to temporarily use Aux 3 (was AC clutch) or Injector 5 (CE light), then you can set them back to their original functions after tuning. sorry brotha but where do i find the aux3 at or the injector 5, i am going to use the knockblock permanently because the g4 ecu that i have doesnt support the knocksensor Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 20, 2020 Report Share Posted April 20, 2020 Quote Link to comment Share on other sites More sharing options...
ali toroganan Posted April 20, 2020 Author Report Share Posted April 20, 2020 can i use those pins as permanent? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 20, 2020 Report Share Posted April 20, 2020 Obviously AC or the CE light wont work without them so that is up to you. Quote Link to comment Share on other sites More sharing options...
ali toroganan Posted April 20, 2020 Author Report Share Posted April 20, 2020 is there a way i can get the knockblock permanently connected to the ecu Quote Link to comment Share on other sites More sharing options...
ali toroganan Posted April 21, 2020 Author Report Share Posted April 21, 2020 btw my serial number is 17211 if it helps, thanks folks Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 21, 2020 Report Share Posted April 21, 2020 You can either do away with CE Light or AC as I have already said above or you could change the idle valve to a two wire type which will free up another 3 aux outputs. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.