Justin Eagle Posted April 21, 2020 Report Share Posted April 21, 2020 Hi wondering if I can use my fj100lnk as the ecu for a barra swap? could I repin the plug for the engine and load a barra base map onto it? Quote Link to comment Share on other sites More sharing options...
Vaughan Posted April 21, 2020 Report Share Posted April 21, 2020 Will require quite a bit of rewiring but don't see why not Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 21, 2020 Report Share Posted April 21, 2020 Also, It looks like the FZJ100 ecu doesnt have all the outputs available for E-throttle, so you will have to convert the barra to cable operated throttle. Quote Link to comment Share on other sites More sharing options...
Justin Eagle Posted April 22, 2020 Author Report Share Posted April 22, 2020 2 hours ago, Adamw said: Also, It looks like the FZJ100 ecu doesnt have all the outputs available for E-throttle, so you will have to convert the barra to cable operated throttle. Can the expansion connector be used for that purpose Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 22, 2020 Report Share Posted April 22, 2020 You need Aux 9 & 10 for direct E-throttle control and they are not connected to any pins on that ECU. The options would be return it to Link to have some wire links added to make these outputs available, or use the exturnal E-throttle module: http://dealers.linkecu.com/G4RET Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.