Hermit Posted May 8, 2020 Report Share Posted May 8, 2020 So I’m using a link altezza ecu in my jzx110 But I want to use a link defi Bluetooth smart reader I have to bring up some gauges on a tablet i know Toyota have use their own version of obd2 and it’s just the plug that’s similar so the reader isn’t picking anything up so is it possible for me to repin the obd2 plug to suit? Or will I have to use the can/rs233 port and wire that to the obd2 plug with CanH and CanL? cheers Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 8, 2020 Report Share Posted May 8, 2020 You will need to connect your own ODB2 socket to the CAN1 port on the ECU. The Factory OBD2 socket isnt even connected to the ECU CAN bus. Quote Link to comment Share on other sites More sharing options...
Hermit Posted May 8, 2020 Author Report Share Posted May 8, 2020 This is the can1 port I’ll have to use isn’t it? So I’ll just use a canpcb cable or make my own with a RS232 connector plugs and wire the obd2 plug as pictured? Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 8, 2020 Report Share Posted May 8, 2020 Yes sorry, that socket labelled CAN/RS232 is "CAN1" in the software. If we numbered those 5 pins in the socket photo above, say pin 1 on left end and #5 on right end, CAN L would be pin #2 and CAN H is pin #3. Quote Link to comment Share on other sites More sharing options...
Hermit Posted May 8, 2020 Author Report Share Posted May 8, 2020 Thanks for the help Adam Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.