Aussiemick Posted May 15, 2020 Report Share Posted May 15, 2020 How do I remove the glue from where the circuit board joins the enclosure on a VL ecu. Kudin 1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 15, 2020 Report Share Posted May 15, 2020 Im not sure what you are asking here? Do you mean there is glue holding the original nissan ecu into the case? If that's the case then a common method is heat. Most common adhesive systems start to breakdown at about 80°C so you might be able to heat one of the surfaces that the glue is bonded to with a hair drier or heat gun to weaken it. Quote Link to comment Share on other sites More sharing options...
Aussiemick Posted May 15, 2020 Author Report Share Posted May 15, 2020 Yes it was the glue to hold the nissan board to the case. I tried without heat not being sure what glue was used so I will go with the heat. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.