tasmotorsport Posted May 20, 2020 Report Share Posted May 20, 2020 hi hopfully some one can help we just finished as m60 into a e30 swap and i need some help with setting up the base map on a links strom g4+ has any one got all the trigger infomation dwell times firing angle off set ect best regards tom Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 20, 2020 Report Share Posted May 20, 2020 The small amount of info we have for this engine shows 60-2 on the crank and 2 short, 2 long teeth on the cam. Trigger settings below should work. If you get erractic RPM when cranking then do us a triggerscope and I will confirm from there. Offset will likely be around either 275 or -85 if it follows BMW's normal conventions. The coils are the same as the M50 so you can get the dwell times from the Link M50 base map. Note these coils dont have ignitors built-in so will need a separate ignitor. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.