SAIF Posted June 9, 2020 Report Share Posted June 9, 2020 Hi guys! I am with the newer version of PC Link G4+, installing ethanol content sensor and fuel pressure sensor to do a flex tune. When I set my Injector Deadtime Table to 3D, Secondary Injector Deadtime disappears. If I change to 2D, return to show. Anybody with this problem too? I think its a bug. I would like to set Injector Deadtime to 3D because I am installing a fuel pressure sensor and if have some issue with fuel pressure, have a better deadtime compensation. I know its not very important because if fuel system is ok, differential fuel pressure will not fluctuate. Quote Link to comment Share on other sites More sharing options...
Vaughan Posted June 9, 2020 Report Share Posted June 9, 2020 Could you please attach a copy of your basemap, are you doing this offline or while connected to the ECU? Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 10, 2020 Report Share Posted June 10, 2020 Also, make sure you are on the latest firmware, 3D secondary deadtime was only added in recent firmware. Quote Link to comment Share on other sites More sharing options...
SAIF Posted June 10, 2020 Author Report Share Posted June 10, 2020 18 hours ago, Vaughan said: Could you please attach a copy of your basemap, are you doing this offline or while connected to the ECU? Offline because engine is out of car to build. I am on smartphone now, but send basemap asap. Quote Link to comment Share on other sites More sharing options...
SAIF Posted June 17, 2020 Author Report Share Posted June 17, 2020 (edited) On 6/10/2020 at 1:05 PM, SAIF said: Offline because engine is out of car to build. I am on smartphone now, but send basemap asap. Attached my pclr. Try to change deadtime table from 3D to 2D and will see. EVO 6 NEW SETUP FLEX.pclr Edited June 17, 2020 by SAIF Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 17, 2020 Report Share Posted June 17, 2020 As I said earlier you are on old firmware. Update to the latest firmware and you will be able to use a 3D secondary deadtime table. Quote Link to comment Share on other sites More sharing options...
SAIF Posted June 19, 2020 Author Report Share Posted June 19, 2020 On 6/17/2020 at 12:28 AM, Adamw said: As I said earlier you are on old firmware. Update to the latest firmware and you will be able to use a 3D secondary deadtime table. Thanks, Adam! Don’t know where I am with my head!! I was sure i had updated!! Quote Link to comment Share on other sites More sharing options...
alain Posted November 3, 2020 Report Share Posted November 3, 2020 Is this also a bug in the old VTS software for the V88? I am trying to address some issues in my twin turbo Dart, but when I change from 2D to 3D, there is no table to fill. Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 3, 2020 Report Share Posted November 3, 2020 It works for me in V88. Do you actually have any free tables left? - check in the table allocation menu down the bottom of the ecu settings tree. Quote Link to comment Share on other sites More sharing options...
alain Posted November 5, 2020 Report Share Posted November 5, 2020 Ahh, found it. I didn't have any tables left, but had a few in there that I ended up not using anymore. Freed up some tables, and it works for me now. Thanks. Quote Link to comment Share on other sites More sharing options...
SAIF Posted June 14, 2022 Author Report Share Posted June 14, 2022 On 11/3/2020 at 5:39 PM, Adamw said: It works for me in V88. Do you actually have any free tables left? - check in the table allocation menu down the bottom of the ecu settings tree. Adam, Nos that I am updating some mods in the car I am returning to tuning flex fuel. I updated my ECU but nothing change. When I change my primary injector deadtime from 2D to 3D, my staged injector deadtime table disapper. Could you check? Thanks! Atual (Firware Updated).pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 14, 2022 Report Share Posted June 14, 2022 Looks like it needs to be done with the ECU online. Attached your updated map with 3D deadtimes enabled. 665710010_Atual(FirwareUpdated).pclr Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.