Josh Smith Posted June 21, 2020 Report Share Posted June 21, 2020 Hi Adam Link G4+ P&P Subaru v7-v8 ecu I have the dash wired to can 1 and setup the can 1 in the ecu to aim mxs dash port 1000 and 20 hz The problem is the dash cant see any data from the ecu. The dash is a aim brought for link its the new 7" street version Also with out realizing I transferred a page and lost all the pages preinstalled it would be good to know how to get them back Also having problems with RH cam sensor it works for a while then stops working. looses signal. have removed sensor and tested input to ecu with volt meter. re installed and rotated engine by hand and worked. then run engine and worked long enough to check tdc and carry out vvt cam test and setup on left and right sensors. then gave up the ghost. frick knows what is going on there Thanks Adam MXG 1.2 Strada.zconfig base map adam.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 21, 2020 Report Share Posted June 21, 2020 For the dash, update your ECU firmware. You are on an old version from before the MXS CAN stream was added. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.