Cnote0ne Posted June 29, 2020 Report Share Posted June 29, 2020 Hi All, My car is stalling when I stop at red lights. It's not all the time, usually if I coast in neutral. I searched the forum and found lots of stalling post but none of the solutions seem to work for me. Tech support can't figure it out either. They don't see any issue with e-throttle setup and tracking. Hope someone can help. Base map attached, but log file too large to upload. I can email it. Thanks. E-Thrttlworkingbasemap62620.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 29, 2020 Report Share Posted June 29, 2020 Can you share the log file via google drive/onedrive etc. Quote Link to comment Share on other sites More sharing options...
Cnote0ne Posted June 29, 2020 Author Report Share Posted June 29, 2020 6 minutes ago, Adamw said: Can you share the log file via google drive/onedrive etc. Yes, I need an email address. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 29, 2020 Report Share Posted June 29, 2020 You dont need an email, you want it so anyone on the fourm can view/help. In google drive, right click on file, "get shareable link", make sure the restricted option is set to "anyone with link". Past the link here. In onedrive, right click on file, choose share, set "anyone with link can edit", then copy link down the bottom. Quote Link to comment Share on other sites More sharing options...
Cnote0ne Posted June 29, 2020 Author Report Share Posted June 29, 2020 10 minutes ago, Adamw said: You dont need an email, you want it so anyone on the fourm can view/help. In google drive, right click on file, "get shareable link", make sure the restricted option is set to "anyone with link". Past the link here. In onedrive, right click on file, choose share, set "anyone with link can edit", then copy link down the bottom. Thanks, figured it out. Here is the link. https://1drv.ms/u/s!AjI8sO2lko8ajmgCcZOY36le9L5I?e=EhGtzU Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 29, 2020 Report Share Posted June 29, 2020 It is mostly your idle base position hasnt been tuned. The idle base position currently has numbers in it about 1% less than what it requires to idle. So try the attached file, I have increased the idle base position a bit and I have turned on idle ignition control which should help and will get rid of that hunting you have in some places. It may still need more work but it is closer. E-Thrttlworkingbasemap62620 Idle tweaks.pclr Quote Link to comment Share on other sites More sharing options...
Cnote0ne Posted June 29, 2020 Author Report Share Posted June 29, 2020 13 hours ago, Adamw said: It is mostly your idle base position hasnt been tuned. The idle base position currently has numbers in it about 1% less than what it requires to idle. So try the attached file, I have increased the idle base position a bit and I have turned on idle ignition control which should help and will get rid of that hunting you have in some places. It may still need more work but it is closer E-Thrttlworkingbasemap62620 Idle tweaks.pclr 166.8 kB · 0 downloads Thanks, I'll try it as soon I get back home in a couple of days and report back. Quote Link to comment Share on other sites More sharing options...
Cnote0ne Posted July 1, 2020 Author Report Share Posted July 1, 2020 The car is idling much better and no more stalls. Much appreciated! Thanks. Quote Link to comment Share on other sites More sharing options...
Cnote0ne Posted July 13, 2020 Author Report Share Posted July 13, 2020 I've been doing some fuel tuning and now the stalling is back. When I go into neutral from a 3k rpm rev the rpm drop and it stall. Logfile: https://1drv.ms/u/s!AjI8sO2lko8ajmtIeFfEtJ2aZ1Pw?e=KVsk54 $Basemap070720-AFR1.pclr Quote Link to comment Share on other sites More sharing options...
Rossobianconero Posted July 13, 2020 Report Share Posted July 13, 2020 the car is still moving when the engine stall, you are going faster that the speed lockout on the setup, change to speed lockout to off. Then the car will actually try to idle when you are breaking. Quote Link to comment Share on other sites More sharing options...
Cnote0ne Posted July 13, 2020 Author Report Share Posted July 13, 2020 18 minutes ago, Rossobianconero said: the car is still moving when the engine stall, you are going faster that the speed lockout on the setup, change to speed lockout to off. Then the car will actually try to idle when you are breaking. Ok, I'll try it with speed locklout off. Thanks. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 13, 2020 Report Share Posted July 13, 2020 It is not your ISC speed lockout, that is there to prevent the ECU closing the throttle during over run, turning it off will likely make things worse. I would increase the idle ignition speed lockout to about 22km though which may help. I would also make the whole top row of your E-throttle target table 3.0%, and you might still need to add 0.2% or a bit more for the engine fan step. I suspect also the area I have highlighted in your fuel table below may need increasing and flattening out as it goes lean just before it stalls in most places in the log but try the above changes first. Quote Link to comment Share on other sites More sharing options...
Cnote0ne Posted July 13, 2020 Author Report Share Posted July 13, 2020 Speed lockout didn't help. It still wanted to stall, I had to blip the throttle to keep it from stalling. 58 minutes ago, Adamw said: It is not your ISC speed lockout, that is there to prevent the ECU closing the throttle during over run, turning it off will likely make things worse. I would increase the idle ignition speed lockout to about 22km though which may help. I would also make the whole top row of your E-throttle target table 3.0%, and you might still need to add 0.2% or a bit more for the engine fan step. I suspect also the area I have highlighted in your fuel table below may need increasing and flattening out as it goes lean just before it stalls in most places in the log but try the above changes first. Thanks, I'll try your suggestion. Quote Link to comment Share on other sites More sharing options...
Cnote0ne Posted July 15, 2020 Author Report Share Posted July 15, 2020 The stalling seem to stop. When I'm in neutral and still moving, it drops to idle and stays there. Thanks Adamw. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.